0 Items | Total: £0.00

SPECIALIST EQUIPMENT FOR THE SURFACE COATINGS INDUSTRY

Cross Hatch Tester

Product Code: BGD 502

Cross Hatch Tester

Cross Hatch Tester

More Views

SKU Product Name Price Qty
BGD 502/1 1mm /6 blades and 2mm /6 blades
Next Day Despatch
£378.00
BGD 502/2 1mm spacing/11 blades
Next Day Despatch
£252.00
BGD 502/3 1mm spacing/6 blades
Next Day Despatch
£252.00
BGD 502/4 2mm spacing/11 blades
Next Day Despatch
£252.00
BGD 502/5 2mm spacing/6 blades
Next Day Despatch
£252.00
BGD 502/6 3mm spacing/6 blades
Next Day Despatch
£252.00
BGD 502/P Replacment blades
Next Day Despatch
£115.50

This instrument is widely used to evaluate the adhesion of various coatings. A highly precise machined wheel presenting 6 or 11 cutting blades with various spacing is mounted in a handle. The test is carried out by performing 2 series of crossed cuts at right angle. The obtained lattices is either brushed or cleared with adhesion tape. According to the coatings thickness and the related spacing, the results can be classified with reference to a standard scale. It has long life tool with 6 cutting edges and comfortable wood handle.

When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.    

The Cross Hatch Cutters conforms with the requirements of:
BS 3900 E6; BS/EN ISO 2409; ASTM D 3359 D 3302;

 

Main Technical Parameters

■ Six working side blades: When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to rotate it to achieve a new blade.
■ Multi-cutting blades spacing: 1mm/2mm/3mm

■ The number of square: 25squares/100squares

NormalPacking List

① Carrying case                          ②  Cross Hatch Cutter & Handle

③ 1 roll of 3M Scotch Transparent Tape   ④  Brush

⑤ Magnifier                            ⑥  Certificate of Conformity  (if requested)

 

Ordering Information

No. Of Teeth

No. Of Cutting Edges

Cutter Spacing

BGD 502/2

11

6

1mm

BGD 502/3

6

6

1mm

BGD 502/4

11

6

2mm

BGD 502/5

6

6

2mm

BGD 502/6

6

6

3mm

BGD 504/2

11

1

1mm

BGD 504/3

6

1

1mm

BGD 504/4

11

1

2mm

BGD 504/5

6

1

2mm

BGD 504/6

6

1

3mm

Procedure

-Make a lattice pattern in the film with the appropriate tool, cutting the substrate

-Brush in diagonal direction 5 times each, using a brush pen or tape over the cut and remove with Parcel tape

-Examine the grid area using an illuminated magnifier.