BGD series Impact Tester produced by our company is in accordance with the specification in National Standards determination of paint film resistance to impact and the practical requirement of mechanical construction. The operation principle of the impact tester is by means of a weight that drops down from a specified height and impacts a painted panel under test to result in its rapid deformation, and the film resistance to impact is then attained from observing the film to see if it cracks or peels off.
Main Technical Parameters
Ordering information →
Technical Parameter↓
|
BGD 30/2
|
BGD 30/4
|
BGD 30/5
|
BGD 30/6
|
Instrument scale length
|
0-50cm
|
0-100cm
|
0-100cm(40inch)
|
0-100cm(40inch)
|
Graduation
|
1cm
|
1cm
|
1cm
|
1cm
|
Mass of hammer
|
1Kg
|
1Kg
|
1000g(2 pcs) 300g(1 pc)
|
1000g(2 pcs)
2 lb.(2 pcs)
|
Piercer specification
|
ф8mm
|
ф8mm
|
Ф 12.7mm(1/2 inch)
Ф 15.9mm(5/8 inch)
|
Ф 20 mm
Ф 15.9mm(5/8 inch)
|
Notch diameter on the bolster block
|
ф15mm
|
ф15mm
|
Ф 16.3mm ф 31.75mm
|
Ф 27mm ф 16.3mm(41/64inch)
|
Impact depth of piercer
|
2mm
|
2mm
|
2.5mm
|
2.5mm
|
Standard
|
GB/T 1732
|
GB/T 1732
|
ASDM D 2794
ISO 6272.2
|
ISO 6272.1
|